dmesg - AMD FirePro 2260
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-37-generic (buildd@kapok) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #64-Ubuntu SMP Mon Sep 22 21:28:38 UTC 2014 (Ubuntu 3.13.0-37.64-generic 3.13.11.7)
Command line: BOOT_IMAGE=/vmlinuz-3.13.0-37-generic root=/dev/mapper/main-racine ro splash quiet vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000967ff] usable
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dfdf9bff] usable
BIOS-e820: [mem 0x00000000dfdf9c00-0x00000000dfe4bbff] ACPI NVS
BIOS-e820: [mem 0x00000000dfe4bc00-0x00000000dfe4dbff] ACPI data
BIOS-e820: [mem 0x00000000dfe4dc00-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fcffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000019fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Dell Inc. Precision WorkStation T3500 /09KPNV, BIOS A08 09/16/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x1a0000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0DFF00000 mask FFFF00000 uncachable
1 base 0E0000000 mask FE0000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xdfdf9 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000090000] 90000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0x19fe00000-0x19fffffff]
[mem 0x19fe00000-0x19fffffff] page 2M
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x19c000000-0x19fdfffff]
[mem 0x19c000000-0x19fdfffff] page 2M
init_memory_mapping: [mem 0x180000000-0x19bffffff]
[mem 0x180000000-0x19bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdfdf8fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xdfbfffff] page 2M
[mem 0xdfc00000-0xdfdf8fff] page 4k
init_memory_mapping: [mem 0x100000000-0x17fffffff]
[mem 0x100000000-0x17fffffff] page 2M
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
RAMDISK: [mem 0x349ae000-0x364cefff]
ACPI: RSDP 00000000000fec30 000024 (v02 DELL )
ACPI: XSDT 00000000000fcccc 00007C (v01 DELL B10K 00000015 ASL 00000061)
ACPI: FACP 00000000000fcdbc 0000F4 (v03 DELL B10K 00000015 ASL 00000061)
ACPI: DSDT 00000000ffe9b206 004A74 (v01 DELL dt_ex 00001000 INTL 20050624)
ACPI: FACS 00000000dfdf9c00 000040
ACPI: SSDT 00000000ffe9fd8b 00009C (v01 DELL st_ex 00001000 INTL 20050624)
ACPI: APIC 00000000000fceb0 00015E (v01 DELL B10K 00000015 ASL 00000061)
ACPI: BOOT 00000000000fd00e 000028 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: ASF! 00000000000fd036 000096 (v32 DELL B10K 00000015 ASL 00000061)
ACPI: MCFG 00000000000fd0cc 00003C (v01 DELL B10K 00000015 ASL 00000061)
ACPI: HPET 00000000000fd108 000038 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: TCPA 00000000000fd364 000032 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: DMAR 00000000000fd396 0000C8 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: SLIC 00000000000fd140 000176 (v01 DELL B10K 00000015 ASL 00000061)
ACPI: SSDT 00000000dfe4dc00 000AF4 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000019fffffff]
Initmem setup node 0 [mem 0x00000000-0x19fffffff]
NODE_DATA [mem 0x19fff7000-0x19fffbfff]
[ffffea0000000000-ffffea00067fffff] PMD -> [ffff880199600000-ffff88019f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x19fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00095fff]
node 0: [mem 0x00100000-0xdfdf8fff]
node 0: [mem 0x100000000-0x19fffffff]
On node 0 totalpages: 1572238
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3989 pages, LIFO batch:0
DMA32 zone: 14264 pages used for memmap
DMA32 zone: 912889 pages, LIFO batch:31
Normal zone: 10240 pages used for memmap
Normal zone: 655360 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 32 CPUs, 28 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x00096000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdfdf9000-0xdfdf9fff]
PM: Registered nosave memory: [mem 0xdfdfa000-0xdfe4afff]
PM: Registered nosave memory: [mem 0xdfe4b000-0xdfe4bfff]
PM: Registered nosave memory: [mem 0xdfe4c000-0xdfe4cfff]
PM: Registered nosave memory: [mem 0xdfe4d000-0xdfe4dfff]
PM: Registered nosave memory: [mem 0xdfe4e000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfcffffff]
PM: Registered nosave memory: [mem 0xfd000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffafffff]
PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:32 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880199200000 s86400 r8192 d24192 u131072
pcpu-alloc: s86400 r8192 d24192 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1547649
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-37-generic root=/dev/mapper/main-racine ro splash quiet vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 6076452K/6288952K available (7375K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1444K bss, 212500K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=32.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-31.
NR_IRQS:16640 nr_irqs:1344 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 25165824 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2800.151 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.30 BogoMIPS (lpj=11200604)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28541 entries in 112 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fedc0000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fedc0000 ver 1:0 cap c90780106f0462 ecap f020fe
dmar: RMRR base: 0x000000dfe58000 end: 0x000000dfe6ffff
dmar: ATSR flags: 0x0
This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable. To maintain system stability
interrupt remapping is being disabled. Please
contact your BIOS vendor for an update
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU W3530 @ 2.80GHz (fam: 06, model: 1a, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (22401.20 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdfdf9c00-0xdfe4bbff] (335872 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 7:55:26, date: 10/24/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0xdff00000-0xf7ffffff]
pci_bus 0000:00: root bus resource [mem 0xff980000-0xff980fff]
pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff]
pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff]
pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xff20-0xff3f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xff00-0xff1f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xfc00-0xfc1f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf7ffa000-0xf7ffa3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7ffc000-0xf7ffffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xff80-0xff9f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xff60-0xff7f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xff40-0xff5f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xff980000-0xff9803ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0900 (mask 003f)
pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07]
pci 0000:00:1f.2: reg 0x14: [io 0xfe10-0xfe13]
pci 0000:00:1f.2: reg 0x18: [io 0xfe20-0xfe27]
pci 0000:00:1f.2: reg 0x1c: [io 0xfe30-0xfe33]
pci 0000:00:1f.2: reg 0x20: [io 0xfec0-0xfedf]
pci 0000:00:1f.2: reg 0x24: [mem 0xff970000-0xff9707ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7ffb000-0xf7ffb0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xece0-0xecff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:02:00.0: [1002:95cf] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: reg 0x18: [mem 0xf7df0000-0xf7dfffff 64bit]
pci 0000:02:00.0: reg 0x20: [io 0xdc00-0xdcff]
pci 0000:02:00.0: reg 0x30: [mem 0xf7e00000-0xf7e1ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xf7d00000-0xf7efffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03]
pci 0000:00:07.0: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [14e4:1681] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xf7ae0000-0xf7aeffff 64bit]
pci 0000:05:00.0: reg 0x18: [mem 0xf7af0000-0xf7afffff 64bit]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:00:1c.5: bridge window [mem 0xf7a00000-0xf7afffff]
pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xf7ffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xff980000-0xff980fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: Enabled 3 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci 0000:3f:00.0: [8086:2c41] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:3f:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:3f:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:3f:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:3f:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:3f:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:3f:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:3f:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:3f:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:3f:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:3f:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:3f:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:3f:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:3f:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:3f:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:3f:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:1f.2: no compatible bridge window for [mem 0xff970000-0xff9707ff]
Expanded resource reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x00096800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdfdf9c00-0xdfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:00: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
system 00:00: [io 0x0c00-0x0c7f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1f.2: BAR 5: assigned [mem 0xf0400000-0xf04007ff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xf7d00000-0xf7efffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03]
pci 0000:00:07.0: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff]
pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:00:1c.5: bridge window [mem 0xf7a00000-0xf7afffff]
pci 0000:00:1e.0: PCI bridge to [bus 06]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff]
pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: resource 9 [mem 0xdff00000-0xf7ffffff]
pci_bus 0000:00: resource 10 [mem 0xff980000-0xff980fff]
pci_bus 0000:00: resource 11 [mem 0xff97c000-0xff97ffff]
pci_bus 0000:00: resource 12 [mem 0xfed20000-0xfed9ffff]
pci_bus 0000:01: resource 1 [mem 0xf7b00000-0xf7bfffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7efffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf01fffff]
pci_bus 0000:04: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xf7a00000-0xf7afffff]
pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000effff]
pci_bus 0000:06: resource 8 [mem 0x000f0000-0x000fffff]
pci_bus 0000:06: resource 9 [mem 0xdff00000-0xf7ffffff]
pci_bus 0000:06: resource 10 [mem 0xff980000-0xff980fff]
pci_bus 0000:06: resource 11 [mem 0xff97c000-0xff97ffff]
pci_bus 0000:06: resource 12 [mem 0xfed20000-0xfed9ffff]
pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 27780K (ffff8800349ae000 - ffff8800364cf000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdbdf9000-0xdfdf9000] (64MB) mapped at [ffff8800dbdf9000-ffff8800dfdf8fff]
Simple Boot Flag at 0x7a set to 0x80
microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x11
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1414137326.932:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 11922
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 65 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1400x1050x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004e80000, using 5824k, total 5824k
Console: switching to colour frame buffer device 175x65
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [VBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 22, io mem 0xf7ffa000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xff980000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-37-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-37-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-37-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.13.0-37-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.13.0-37-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.13.0-37-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one day, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 2:460:926
clockevents clockevent19: hash matches
rtc_cmos 00:04: setting system clock to 2014-10-24 07:55:27 UTC (1414137327)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
systemd-udevd[172]: starting version 204
wmi: Mapper loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 66 for MSI/MSI-X
ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ccc ems sxs
tg3.c:v3.134 (Sep 16, 2013)
[drm] radeon kernel modesetting enabled.
checking generic (e0000000 5b0000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RV620 0x1002:0x95CF 0x1002:0x2143).
[drm] register mmio base: 0xF7DF0000
[drm] register mmio size: 65536
ATOM BIOS: 113
radeon 0000:02:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
radeon 0000:02:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 3053548 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Loading RV620 Microcode
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:02:00.0: WB enabled
radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffff880190744c00
radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000010000c0c and cpu addr 0xffff880190744c0c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:02:00.0: irq 67 for MSI/MSI-X
radeon 0000:02:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400100 irq 66
ata2: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400180 irq 66
ata3: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400200 irq 66
ata4: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400280 irq 66
ata5: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400300 irq 66
ata6: SATA max UDMA/133 abar m2048@0xf0400000 port 0xf0400380 irq 66
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD2
[drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] DP-2
[drm] HPD4
[drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] Internal thermal controller with fan control
[drm] radeon: power management initialized
tg3 0000:05:00.0 eth0: Tigon3 [partno(BCM95761) rev 5761100] (PCI Express) MAC address b8:ac:6f:93:46:48
tg3 0000:05:00.0 eth0: attached PHY is 5761 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:05:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:05:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[drm] fb mappable at 0xE0141000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:02:00.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:02:00.0 on minor 0
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATAPI: TSSTcorp DVD+/-RW TS-H653G, DW10, max UDMA/100
ata3.00: applying bridge limits
ata1.00: ATA-8: ST3500418AS, CC46, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: ATA-8: ST3500418AS, CC46, max UDMA/133
ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/100
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC46 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access ATA ST3500418AS CC46 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-H653G DW10 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sda: sda1 sda2
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 2800.099 MHz
random: lvm urandom read with 50 bits of entropy available
bio: create slab at 1
usb 1-1: New USB device found, idVendor=1058, idProduct=0730
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: My Passport 0730
usb 1-1: Manufacturer: Western Digital
usb 1-1: SerialNumber: 57584B314141305637303332
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi6 : usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
EXT4-fs (dm-0): write access will be enabled during recovery
usb 1-2: new high-speed USB device number 3 using ehci-pci
random: nonblocking pool is initialized
usb 1-2: New USB device found, idVendor=0424, idProduct=2514
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
Switched to clocksource tsc
EXT4-fs (dm-0): orphan cleanup on readonly fs
EXT4-fs (dm-0): 8 orphan inodes deleted
EXT4-fs (dm-0): recovery complete
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
usb 8-1: new full-speed USB device number 2 using uhci_hcd
scsi 6:0:0:0: Direct-Access WD My Passport 0730 1012 PQ: 0 ANSI: 6
scsi 6:0:0:1: Enclosure WD SES Device 1012 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg3 type 0
scsi 6:0:0:1: Attached scsi generic sg4 type 13
sd 6:0:0:0: [sdc] 976707584 512-byte logical blocks: (500 GB/465 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 47 00 10 08
sd 6:0:0:0: [sdc] No Caching mode page found
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] No Caching mode page found
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 6:0:0:0: [sdc] No Caching mode page found
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] Attached SCSI disk
usb 8-1: New USB device found, idVendor=046d, idProduct=c52b
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1: Product: USB Receiver
usb 8-1: Manufacturer: Logitech
usb 8-2: new full-speed USB device number 3 using uhci_hcd
usb 8-2: New USB device found, idVendor=046d, idProduct=c52b
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: USB Receiver
usb 8-2: Manufacturer: Logitech
Adding 11717628k swap on /dev/sdb1. Priority:-1 extents:1 across:11717628k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[418]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \GLBC 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \SACT 2 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \SSTS 3 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
type=1400 audit(1414130135.215:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=493 comm="apparmor_parser"
type=1400 audit(1414130135.215:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=493 comm="apparmor_parser"
type=1400 audit(1414130135.215:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=493 comm="apparmor_parser"
type=1400 audit(1414130135.215:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=493 comm="apparmor_parser"
type=1400 audit(1414130135.215:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=493 comm="apparmor_parser"
type=1400 audit(1414130135.215:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=493 comm="apparmor_parser"
snd_hda_intel 0000:00:1b.0: irq 68 for MSI/MSI-X
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
lp0: using parport0 (interrupt-driven).
input: Dell WMI hotkeys as /devices/virtual/input/input5
gpio_ich: GPIO from 195 to 255 on gpio_ich
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-1/input2
logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-2/input2
input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.2/0003:046D:C52B.0003/input/input6
logitech-djdevice 0003:046D:C52B.0007: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:1d.2-1:1
input: Logitech Unifying Device. Wireless PID:200a as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.2/0003:046D:C52B.0006/input/input7
logitech-djdevice 0003:046D:C52B.0008: input,hidraw3: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:200a] on usb-0000:00:1d.2-2:1
autoconfig: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line
speaker_outs=1 (0x13/0x0/0x0/0x0/0x0)
hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0x14
Line=0x15
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
ses 6:0:0:1: Attached Enclosure device
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (779) killed by TERM signal
type=1400 audit(1414130142.943:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=882 comm="apparmor_parser"
type=1400 audit(1414130142.943:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=882 comm="apparmor_parser"
type=1400 audit(1414130142.943:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=882 comm="apparmor_parser"
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1414130143.023:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=970 comm="apparmor_parser"
type=1400 audit(1414130143.023:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=970 comm="apparmor_parser"
type=1400 audit(1414130143.023:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=970 comm="apparmor_parser"
type=1400 audit(1414130143.023:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=969 comm="apparmor_parser"
type=1400 audit(1414130143.023:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=969 comm="apparmor_parser"
type=1400 audit(1414130143.023:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=970 comm="apparmor_parser"
type=1400 audit(1414130143.023:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=970 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (883) killed by HUP signal
init: cups main process ended, respawning
tg3 0000:05:00.0: irq 69 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: gdm main process (1128) killed by TERM signal
init: samba-ad-dc main process (1212) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1330) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
tg3 0000:05:00.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:05:00.0 eth0: Flow control is on for TX and on for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit_printk_skb: 141 callbacks suppressed
type=1400 audit(1414130173.034:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1898 comm="apparmor_parser"
type=1400 audit(1414130173.034:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1898 comm="apparmor_parser"
type=1400 audit(1414130173.034:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1898 comm="apparmor_parser"
type=1400 audit(1414131539.681:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3799 comm="apparmor_parser"
type=1400 audit(1414131539.681:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3799 comm="apparmor_parser"
type=1400 audit(1414131539.685:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3799 comm="apparmor_parser"
perf samples too long (2653 > 2500), lowering kernel.perf_event_max_sample_rate to 50000